Add Z-Wave to a Lyric Alarm Panel

To add a Z-Wave device to any hub is easy if you know 2 things. 

1. How to put the Z-Wave device into Enrollment or Include mode and,

2. How to place the controller, in this case, a Lyric, into Include mode.

• From the Home Screen, press Automation
• Scroll down to the bottom and press Tools
• Press Include Devices
• Go to the Z-Wave Device and place it into Include or Enrollment mode.
• When the device is Included you will hear two beeps
• When all devices are added, press the done button. 

Placing Z-Wave devices into Include mode:

Leviton - Press and hold the up paddle for 7 seconds until the light turns amber, then release and tap the paddle up. The Light will flash green.